|
|
Installation of the spotlights
using the spotlight support box TEKPF03
|
|
| |
|
|
These support boxes are appropriate for the following installation type:
|
| |
- in false-ceilings or walls in masonry or reinforced concrete
- for round small/medium spotlighs ( from 50mm to 150mm)
- for which you know at least aproximativelly the diameter
- When the coverage of the brick is made using plaster of about 1 cm thickness
- When the installation in reinforced concrete must be done at once or it is already finished
- It is possible to install them using the appropriate application system
|
|
|
| |
|
|
|
|
THE SUPPORT BOX TEKPF03 |
|
| |
|
|
|
|
| |
| |
TEKPF03
low version.
|
| |
 |
Universal Spotlight support box:
h 83 x l 200 x p137 mm
to use in masonry and reinforced concrete.
|
| |
Package 20pcs (h 37xl 40xp 40) |
|
|
|
|
TEKPF03/TA
high version with transformer.
|
| |
 |
Spotlight support box with transformer holder The same functions asm the TEKPF03A with possibility of inserting the transformer. h 113 x l 360 x p137
|
| |
Package 10pcs (h 33xl 59xp 39) |
|
| |
| |
TEKPF03A high version
|
| |
 |
Universal spotlight support box h 113 x l 200 x p137 mm
to use in masonry and
reinforced concrete |
| |
Package 20pcs (h 37xl 40xp 40) |
|
|
| |
TEKPFAP/S
|
| |
 |
application system for box fitting
one centimetre away from the brick |
| |
unitary pack
|
|
|
|
| |
|
|
| |
DESCRIPTION
The universal spotlight support box type Tekno Soluzioni Art. TEKPF03, hole from 50mm to 103mm,
is used as a holder for illuminating spotlights in the ceilings, walls of reinforced concrete |
|
| |
|
|
| |
THE HEIGHT of these boxes and the related inside volume may be changed
jointing the cover in different positions: standard and raised.
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
|
| |
|
|
